Plumbing Fixtures in Sheridan, IN

When a housing market moves slowly and homes stay in families for generations, fixtures stay in place long past the point where a faster-moving market would have prompted an update. Sheridan's older grid homes regularly have original faucets that drip at the stem packing, toilets that run because the flapper has long hardened, shutoff valves under sinks and at toilets that have not been exercised in years and will fail when someone finally turns them, and hose bibs that weep at the packing nut every spring.

We handle all of this: replacement of worn fixtures with new, replacing rather than patching shutoff valves that have failed or are at risk, and installing customer-supplied fixtures when the homeowner has chosen a specific unit they want us to set. We do not push premium fixtures when a standard quality replacement serves the home's needs.

• Kitchen and bathroom faucet replacement, including pull-down kitchen faucets and single and double-handle bath faucets.
• Toilet replacement and flapper and fill valve service for units that run or do not flush reliably.
• Shutoff valve replacement under sinks, at toilets, and at appliance connections where original valves have corroded or stuck.
• Hose bib replacement for exterior faucets that drip or have lost packing seal after winter freeze cycles.
• Showerhead, shower valve, and tub spout service for worn or dripping original tub and shower assemblies.
• Garbage disposal installation and replacement in Sheridan kitchens where the drain configuration supports one.

Older homes sometimes reveal additional issues when a fixture is removed. A corroded shutoff valve under the faucet, supply lines that have hardened and cracked, or drain connections that have been makeshift-repaired in a previous decade can all surface when we open things up. We call out what we find before adding any scope and quote the additional work separately so you can decide whether to address it at the same visit.

For homeowners choosing their own fixture at the hardware store, we install it as long as it meets applicable code requirements for the installation location. We ask about rough-in dimensions and connection type before you purchase if you call us first, so you can buy the right product on the first trip.

My toilet runs all the time. Is that a flapper or something bigger?

A running toilet is usually a flapper that no longer seals, sometimes a fill valve that has failed. Both are inexpensive repairs on a unit that is otherwise sound. If the toilet is old enough that the tank is cracked or the mounting hardware has corroded, replacement is worth considering.

Can I buy my own faucet and have you install it?

Yes. Call us first with the existing faucet's hole configuration and whether it is a single-hole or three-hole setup, and we will advise on what to buy. We install customer-supplied fixtures at the same flat-rate pricing.

The shutoff valve under my kitchen sink is stuck and dripping. Should I replace the whole valve?

A stuck or leaking shutoff valve on an older home is best replaced rather than forced. Forcing a stuck valve risks cracking it and a sudden water loss. A new quarter-turn ball valve at that location gives you reliable shutoff for the next service situation.